|
Space Saver Frames
 New
Space Saver Frames reduce storage requirements while maintaining
traditional stencil mounting techniques.
This system consists of two parts. The first part is
the "Adapter" which is 29"x29" O.D. x 1" high. The "Adapter" is
required for each printer. The second part is the "Space Saver Frame".
The "Space Saver Frame" is 29"x29"x0.5" high. This frame is designed
to be stretched with polyester mesh to provide a flexible mounting
platform for stainless steel stencils.
 The
"Space Saver Frame" is attached to the "Adapter" using pins that are
permanently captured in the "Adapter". Bushings pressed into the "Space
Saver Frame" receive the pins and prevent the assembly from shifting
while being installed in the printer. This system effectively reduces
storage space from 1.5" per stencil to only 0.5" per stencil.
Three frames will fit in the traditional space of
one. It eliminates the problems associated with shipping bare stencil
foils that can be damaged in shipment or can cause finger cuts while
attaching to "Frameless" systems. Finally, because of the strength of
the "Space Saver Frame", there is no concern of damage during stencil
cleaning. Global Stencil offers the "Space Saver Frame" to replace the
standard 29"x29"x1.5" tubular frames. The 20"x20" and Fuji 4000 versions
will soon be available for shipping. |
